THE ALLIED MONO SUIT IS BUILT FOR THE BIGGEST AND DEEPEST SNOWMOBILE ADVENTURES
Aggressively styled and technology packed, this is a must have if you seek the ultimate in protection and mobility. Featuring 5TECH fabric, fully taped seams, and Cordura Polyester 300d material. The Allied Mono is built with a relaxed fit so that you can get as rowdy as you want. The one-piece design, while obviously super fashionable, also eliminates the gaps that exist in a traditional twopiece getup, meaning you won't have to worry about snow or drafts distracting you while you're sending it.
Allied uses our new 5TECH material, a Cordura HP 300d face and 10k/10k membrane. The Allied boasts three sets of vents—inseam, outseam, and underarm—to let you feel the breeze when you're hucking or digging out. The Allied's also hooked up with more pockets than you have things to put in them—internal, chest, thigh, and hand—as well as an updated helmet-compatible hood. Burly Cordura instep and lower-leg reinforcements fight off sharp running boards attacks.
5TECH material with Cordura HP 300d Polyester face, and 10k/10k membrane
100g ThinsulateFully Insulated
DWR C8 coating for industry leading hydrophobic fabric surface
Asymmetric cuffs and wrist gaiter
Internal suspenders keep Allied in place
Hand, chest, internal and thigh pockets
Arm pit, side vent, and thigh ventilation system
Water proof coil zippers throughout
Internal boot gaiters
509 Altitude Helmet with Fidlock Non-Current
The Altitude helmet is constructed from an innovative new thermoplastic poly alloy outer shell material. This all new material allows for one of the lightest helmets in its class, with a starting weight of just 1260 grams. The Altitude helmet comes in 9 total sizes (Youth SM-LG, Adult XS-2XL) from 3 individual outer shell molds. This results in a smaller overall shell profile, a dialed in fit, and the lightest weight possible.
Goggle performance is directly affected by the fit of the goggles in your helmet. Mixing a different brand goggle and helmet will only result in decreased goggle performance. The 509 goggle and Altitude helmet combo was designed to fit and function perfectly together. Both products were specifically engineered for optimal performance from an industry leading combo fit. The Altitude helmet was engineered from the ground up to provide an improved goggle fit over our previous Evolution shell. Experience the first and only true helmet & goggle combo in the snowmobile industry.
Safety is our #1 focus and concern at 509. With the development of the Altitude helmet we put an emphasis on safety & quality. First is the dual density internal EPS foam. This provides two innovative levels of crash absorbing protection. Next is our industry leading thermoplastic poly alloy outer shell that provides a high level of puncture prevention. The Altitude helmet is covered by not one, but two world leading safety standards: DOT & ECE 2205 Certification. Our competitors only offer one level of safety certification.
The Altitude gives you the ability to dial in the level of ventilation you need. Every rider is different and rides in a wide variety of climates. We understand the need for ventilation customization and designed the Altitude for exactly that. Starting with the all new sleek cold weather breath box that you can add or remove in seconds to dial in air flow through the front of the helmet. Next is the lower removable mesh chin curtain. This prevents wind and snow from entering from underneath the chin area. Allow the forehead brow area are 4 removable internal VentStoppers. These innovative inserts can be added and removed to dial in the amount of air that enters the brow of the helmet. In total the Altitude has 8 oversized intake & exhaust vent ports.
Tired of losing your GoPro? We were too. Lets face it, adhesive mounts frequently fail while snowmobiling. Well that's a thing of the past. Each Altitude includes an innovative rigid GoPro mount that attaches using the top center visor screw. This installs in seconds and eliminates poorly performing adhesive GoPro mounts.
The Altitude breathbox was redesigned from the ground up. It features a slim & sleek profile that allows the breath box to be worn underneath or on top of your 509 goggles. The breathbox installs/removes in seconds and can be custom formed to fit your specific face profile.
This Altitude exclusive feature was born from the request of our customers. Installing in the lower chin area of the helmet (in seconds), this mesh chin curtain prevents unwanted snow and wind from entering from underneath your helmet.
509 Altitude Helmet with MIPS & Fidlock¨ Non-Current
Last season the innovative 509 Altitude snow helmet took the moto and SxS industries by storm. Described as a sleek yet aggressive helmet, it is packed with industry-leading features. Despite the rave reviews and success of this helmet, we went back to the drawing board and asked, “How can we improve?” The result….CARBON FIBER! You heard correctly. All-new for 2016 is the full Carbon Fiber Altitude snow helmet the same fit and function you've come to expect, now crafted from one of the strongest materials on the planet. Strength aside, the Carbon Fiber Altitude is noticeably lighter than its thermoplastic counterpart. If you are looking for the very best snowmobile helmet, look no further than the All-new 2016 509 Carbon Fiber Altitude snow helmet.
What Is MIPS?
In a helmet with MIPS Brain Protection System (BPS) the shell and liner are separated by a low friction layer. When a helmet with a MIPS Brain Protection System is subjected to an angled impact, the low friction layer allows the helmet to slide relative to the head. The MIPS BPS is designed to add protection in helmets against the rotational motion. The rotational motion isa combination of rotational energy (angular velocity) and rotational forces (from angular acceleration) that both affects the brain and increases the risk for minor and severe brain injuries. MIPS BPS has been proven to reduce rotational motion when implemented in a helmet by absorbing and redirecting rotational energies and forces transferred to the brain.
A helmet with the MIPS Brain Protection System offers better protection against rotational motion than one without MIPS. Since 1996 research and tests have been performed to compare a helmet with the MIPS Brain Protection System to a conventional helmet. The results showed that it was possible to redirect and reduce the rotational motion transmitted to the brain by adding the MIPS Brain Protection System.
The Great Misconception
Accident statistics show that many injuries occur due to angled impact to the head. However, in standard tests, the helmet is dropped vertically onto a flat surface. The results are helpful for measuring precise vertical impacts, but inferior for measuring the more realistic scenario of an angled impact. MIPS has been developed for reality and increases protection against angled impacts.
The Altitude snow helmet meets or exceeds DOT and ECE 2205 safety certification standards. It features an innovative dual density, interlocking EPS foam liner that provides top crash protection in the event of an accident. The front chin area of the helmet is protected by a specially designed expanded polyurethane chin insert that provides front impact protection. The outer shell is made of specially designed carbon fiber for maximum shell strength with minimal weight.
In addition to its safety accolades, performance was a key focus during the development process. Innovative aerodynamic channels run across the entire contour of the helmet. These channels are integrated directly into the shell and direct adequate air flow into the specially designed vent scoops. The Altitude snow helmet features 6 integrated vent scoops that provide necessary ventilation to keep you comfortable when riding. Overall, the Altitude features 8 intake/exhaust vent ports. The unique aerodynamic visor features a locking-top center mount that holds the visor in place and prevents unwanted visor movement.
Fidlock® Magnetic Clasp
Additionally the Altitude features the all-new Fidlock magnetic buckle system. This patented technology used a magnetic mechanical fastener for simple securing of the helmet strap. The buckle and snap are magnetically attracted, creating a high locking force that is much easier to use that a traditional “D-ring” strap. The Fidlock buckle passes both DOT and ECE standards with its metal to metal connection points when secured.
The Altitude helmet was designed with two key fit metrics in mind: Rider fit and Goggle fit. First, we created a custom interior EPS matched with a premium removable liner. The Carbon Fiber Altitude helmet with MIPS is available in 6 sizes from XS to 2XL. These 8 sizes are carefully designed across 4 outer shell molds - our competitors only use 2. This provides a precision fit, while minimizing overall helmet circumference. The neck brace ready, contoured shell base provides a comfortable, yet snug feel when putting the helmet on. When the helmet is fully in place it provides an unmatched comfort fit that prevents unwanted helmet movement. The eyeport of the Altitude snow helmet was carefully crafted to fit our 509 Sinister MX-5 and Dirt Pro goggles perfectly, further improving our world famous “509 helmet and goggle combo” fit.
509 Altitude Skyway Blue Snowmobile Helmet (Non-Current)
509 Altitude Skyway Blue Snowmobile Helmet
Receive $25 off your purchase of any 509 helmet and goggle when purchased TOGETHER. Use the promo code 509COMBO at checkout to receive your discount. This offer only applies to the purchase of any FULL PRICE 509 helmet and goggle when purchased together.
There's no helmet like the 509 Altitude helmet! Designed and built from the ground up with 4 ideals in mind: SAFETY, PERFORMANCE, FIT, & STYLE.
Front mouth vent, ventilation channels, and a upward kicked visor. Each Altitude comes standard with an GoPro camera mount, that mounts securely in seconds to the top visor mount.
509 Evolve Jacket N/C (2018)
The Evolve Jacket Shell
The 509 Evolve jacket uses 5TECH materials to create the ultimate big mountain jacket that is weatherproof in all conditions. As a shell, this snow jacket is sized for layering with 509 base layers. The Evolve's best feature is wearability with its 3D fit and cuts made specifically for the most aggressive snowmobiler who tackles the harshest terrain in the backcountry.
Proprietary WEATHERPROOF 5TECHTM Fabric Construction
Industry Leading Durable Water Repellent (DWR)
Advanced wearability with Aggressive Rider FIT Mapping
FOR THE AGGRESSIVE BACKCOUNTRY SNOWMOBILER
The Evolve bib pairs up perfectly with our Evolve jacket. Two products designed to fit and function as one. The Evolve bib features a mid-rise front and rear bib for snow blocking comfort. Featuring fully seam sealed 5TECH fabric, the Evolve is the ultimate in weatherproof & wearability. Its shell construction works perfectly with your 509 base layers for ultimate versatility.
Evolved and improved weatherproof 5TECH fabric with Cordura HP 300d polyester face, and 10k 10k performance
Industry leading durable water repellent (DWR) finish
Fully seam taped
5 Ride insulated seat for warm and dry riding
Mid-rise bib height
Leg stash pocket
Snow blocking leg gaiters
Waterproof side zipper for easy boot access, and ventilation
Chest stash pocket with waterproof zippers
Warm brushed tricot hand pockets
Adjustable boot cuffs
Elastic side panels for slimmer, yet aggressive fit
D-ring for tether
509 Evolve Jacket Shell Non-Current (19/20)
THE EVOLVE JACKET USES 5TECH MATERIALS TO CREATE THE ULTIMATE BIG MOUNTAIN JACKET THAT IS WEATHER PROOF IN ALL CONDITIONS.
As a shell, this jacket is sized for layering with 509 base layers. Aggressive rider fit mapping, and our 5 Tech material with 300d Cordura HP face and 10k 10k performance.
Evolved and improved weatherproof 5TECH fabric construction with 300d cordura HP polyester face, and 10k 10k performance
Industry leading durable water repellent (DWR)
Advanced wearability with aggressive rider fit mapping
Fully seam taped
Waterproof zippers throughout
Full pit zips ventilation with dual zippers
Adjustable & removable hood
Snow blocking wrist gaiters
Snow & wind blocking full collar
Chest stash pocket
Interior stash pockets
Warm brushed tricot hand pockets
D-ring for tether
509 Vis T-Shirt
509 Vis Tee keeps you comfortable and looking great all day in this fabulous T-shirt.
Available in Teal and Yellow
BCA Float Compressed Air Cylinder 1.0 System
BCA Float Compressed Air Cylinder
Sold separately. Includes Consumer Refill Kit. The Float Compressed Air Cylinder is the power and driving force behind our Float System. When the Float trigger is pulled, it activates the release of 2,700 psi of compressed air, inflating the airbag. Always make sure your cylinder is full and hooked up correctly before heading out. Shipped full unless otherwise noted . weight :: 1.3 pounds / 590 grams. Hazmat fee will be charged, unless picked up in person in store at that time the fee would be refunded.
FXR Blade Clutch Helmet 17
DOT from 1270g
ECE from 1300g
“Super Lite” Composite Fiber Shell
Constructed From Aerospace Grade
Carbon Fiber, Kevlar, And Fiberglass
Ultra Hi-Flow Visor Protects From Snow & Roost
Glove Friendly, Lightweight, 3-Point Visor Screws
Dual Density EPS Liner
Rear Diffuser Transfers Impact Load To Compatible Neck Braces