06> $400

THE ALLIED MONO SUIT IS BUILT FOR THE BIGGEST AND DEEPEST SNOWMOBILE ADVENTURES

Aggressively styled and technology packed, this is a must have if you seek the ultimate in protection and mobility. Featuring 5TECH fabric, fully taped seams, and Cordura Polyester 300d material. The Allied Mono is built with a relaxed fit so that you can get as rowdy as you want. The one-piece design, while obviously super fashionable, also eliminates the gaps that exist in a traditional twopiece getup, meaning you won't have to worry about snow or drafts distracting you while you're sending it.

Allied uses our new 5TECH material, a Cordura HP 300d face and 10k/10k membrane. The Allied boasts three sets of vents—inseam, outseam, and underarm—to let you feel the breeze when you're hucking or digging out. The Allied's also hooked up with more pockets than you have things to put in them—internal, chest, thigh, and hand—as well as an updated helmet-compatible hood. Burly Cordura instep and lower-leg reinforcements fight off sharp running boards attacks.

FEATURES

• 5TECH material with Cordura HP 300d Polyester face, and 10k/10k membrane
• 100g Thinsulate Fully Insulated
• DWR C8 coating for industry leading hydrophobic fabric surface
• Asymmetric cuffs and wrist gaiter
• Internal suspenders keep Allied in place
• Hand, chest, internal and thigh pockets
• Arm pit, side vent, and thigh ventilation system
• Water proof coil zippers throughout
• Removeable hood
• 600d reinforcements
• Internal boot gaiters

THE ALLIED MONO SUIT IS BUILT FOR THE BIGGEST AND DEEPEST SNOWMOBILE ADVENTURES

Aggressively styled and technology packed, this is a must have if you seek the ultimate in protection and mobility. Featuring 5TECH fabric, fully taped seams, and Cordura Polyester 300d material. The Allied Mono is built with a relaxed fit so that you can get as rowdy as you want. The one-piece design, while obviously super fashionable, also eliminates the gaps that exist in a traditional twopiece getup, meaning you won't have to worry about snow or drafts distracting you while you're sending it.

Allied uses our new 5TECH material, a Cordura HP 300d face and 10k/10k membrane. The Allied boasts three sets of vents—inseam, outseam, and underarm—to let you feel the breeze when you're hucking or digging out. The Allied's also hooked up with more pockets than you have things to put in them—internal, chest, thigh, and hand—as well as an updated helmet-compatible hood. Burly Cordura instep and lower-leg reinforcements fight off sharp running boards attacks.

FEATURES

• 5TECH material with Cordura HP 300d Polyester face, and 10k/10k membrane
• DWR C8 coating for industry leading hydrophobic fabric surface
• Asymmetric cuffs and wrist gaiter
• Internal suspenders keep Allied in place
• Hand, chest, internal and thigh pockets
• Arm pit, side vent, and thigh ventilation system
• Water proof coil zippers throughout
• Removeable hood
• 600d reinforcements
• Internal boot gaiters

Last season the innovative 509 Altitude helmet took the snowmobile industry by storm. Described as a sleek yet aggressive helmet, it is packed with industry-leading features. Despite the rave reviews and success of this helmet, we went back to the drawing board and asked, “How can we improve?” The result….CARBON FIBER! You heard correctly. All-new for 2016 is the full Carbon Fiber Altitude helmet the same fit and function you've come to expect, now crafted from one of the strongest materials on the planet. Strength aside, the Carbon Fiber Altitude is noticeably lighter than its thermoplastic counterpart. If you are looking for the very best snowmobile helmet, look no further than the all-new 2016 509 Carbon Fiber Altitude helmet!

SAFETY

The Altitude helmet meets or exceeds DOT & ECE 2205 safety certification standards. It features an innovative dual density, interlocking EPS foam liner that provides top crash protection in the event of an accident. The front chin area of the helmet is protected by a specially designed expanded polyurethane chin insert that provides front impact protection. The outer shell is made of specially designed carbon fiber for maximum shell strength with minimal weight.

PERFORMANCE

In addition to its safety accolades, performance was a key focus during the development process. Innovative aerodynamic channels run across the entire contour of the helmet. These channels are integrated directly into shell and direct adequate air flow into the specially designed vent scoops. The Altitude helmet features 6 integrated vent scoops that provide necessary ventilation to keep you comfortable when riding. Overall, the Altitude features 8 intake/exhaust vent ports. And for those cold days, snap in the included cold weather breath box. The unique aerodynamic visor features a locking-top center mount that holds the visor in place and prevents unwanted visor movement.

FIT

The Altitude was designed with two key fit metrics in mind: Rider fit & Goggle fit. First, we created a custom interior EPS matched with a premium removable liner. The Carbon Fiber Altitude is available in 8 sizes from XS to 4XL (Thermoplastic Altitude available in 11 sizes from Youth small to Adult 4XL). These 8 sizes are carefully designed across 3 outer shell molds - our competitors only use 2. This provides a precision fit, while minimizing overall helmet circumference. The neck brace ready, contoured shell base provides a comfortable, yet snug feel when putting the helmet on. When the helmet is fully in place it provides an unmatched comfort fit that prevents unwanted helmet movement. The eyeport of the Altitude helmet was carefully crafted to fit our 509 Sinister X5 & Aviator goggles perfectly, further improving our world famous “509 helmet & goggle combo” fit. The Altitude helmet & 509 brand goggles are two product designed to fit and perform at the highest level when used in combination. And because fit is only as good as the overall weight, the Carbon Fiber Altitude weighs in under 1100g while the Thermoplastic Altitude starts at a class leading 1260g.

STYLE

Finally, the always important STYLE FACTOR. We wanted this helmet to not only perform at the highest level, but to look good doing it. The shell features sleek, yet aggressive lines that provide an innovative and unmatched look. Everything - from the integrated front mouth vent, to the innovative ventilation channels, to the sweeping upward-kicked visor - provides a flowing and seamless transition. Last, but definitely not least, we know you want to show off your riding talent while wearing the Altitude helmet. That's why each Altitude comes standard with an innovative GoPro® camera mount that mounts securely in seconds to the top visor mount.

Last season the innovative 509 Altitude snow helmet took the moto and SxS industries by storm. Described as a sleek yet aggressive helmet, it is packed with industry-leading features. Despite the rave reviews and success of this helmet, we went back to the drawing board and asked, “How can we improve?” The result….CARBON FIBER! You heard correctly. All-new for 2016 is the full Carbon Fiber Altitude snow helmet the same fit and function you've come to expect, now crafted from one of the strongest materials on the planet. Strength aside, the Carbon Fiber Altitude is noticeably lighter than its thermoplastic counterpart. If you are looking for the very best snowmobile helmet, look no further than the All-new 2016 509 Carbon Fiber Altitude snow helmet.

What Is MIPS?

In a helmet with MIPS Brain Protection System (BPS) the shell and liner are separated by a low friction layer. When a helmet with a MIPS Brain Protection System is subjected to an angled impact, the low friction layer allows the helmet to slide relative to the head. The MIPS BPS is designed to add protection in helmets against the rotational motion. The rotational motion isa combination of rotational energy (angular velocity) and rotational forces (from angular acceleration) that both affects the brain and increases the risk for minor and severe brain injuries. MIPS BPS has been proven to reduce rotational motion when implemented in a helmet by absorbing and redirecting rotational energies and forces transferred to the brain.

Patented System

A helmet with the MIPS Brain Protection System offers better protection against rotational motion than one without MIPS. Since 1996 research and tests have been performed to compare a helmet with the MIPS Brain Protection System to a conventional helmet. The results showed that it was possible to redirect and reduce the rotational motion transmitted to the brain by adding the MIPS Brain Protection System.

Introducing 509's Blackfire Allied Mono Suit Shell, the aggressively styled and technology packed! The Allied Monosuit Shell blocks all weather with fully seam-taped 5TECH waterproof/breathable 10k/10k fabric and burly Cordura 300D polyester. The one-piece design eliminates all gaps and the relaxed fit lets you get as rowdy as you want. Three sets of vents-inseam, outseam, and underarm-prevent overheating. Includes pockets for everything, a helmet-compatible hood,plus Cordura reinforced cuffs to fight off running board attacks!

SPECS:

MATERIAL:

5TECH

STYLE:

Shell

INSULATION:

Non-Insulated 

RIDING:

Backcountry & Crossover

Introducing 509's Delta R3 Carbon Fiber Ignite Helmet, the 509 Delta R3 Carbon Fiber Ignite Helmet is the ultimate multi-use all-in-one helmet, featuring the ability to switch between three configurations: dual sport, full face, and open face. The Ignite heated face shield ensures clear vision in the harshest conditions. Carbon fiber construction keeps it super light, while a fully loaded list of features, including the glove-friendly Fidlock magnetic strap buckle, surpasses the most demanding rider’s expectations.

SPECS:

• Carbon fiber hand laid up shell for lightweight performance
• DOT/ECE certified
• Comes standard with Fidlock® easy-open magnetic strap clasp
• Comes standard with our new Pro Series Liner and Cheekpads
• Comes standard with a cold weather breathbox
• 2 shell sizes, and dual density EPS for optimal fit
• Ignite 12 volt heated dual pane shield
• Visor for dual sport capability
• Fidlock chin strap for confidence
• DOT/ECE helmet weight from 1450 grams

The Float 12 2.0 avalanche airbag is our low volume pack, low profile Float pack for heli skiing, cat skiing, out-of-bounds sidecountry riding, and snowmobiling. The Float 12 pack comes with our standard airbag features optimized for small-to-medium torso lengths.

Bca has over 200 refill locations around the world make it the easiest refillable avalanch airbag system on the market. today. Your avalanche airbag requires the Bca Float 2.0 air canister and must be purchased separately.

Specs:

Pack volume: 732 cubic inches

Weight: Full system with full Float 2.0 cylinder: 6.4 lbs 
             Full system without Float 2.0 cylinder: 5 lbs 
             Pack only: 3.3 lbs 

Materials: 210 denier mini ripstop nylon w/ PU coating (main)
                420 denier nylon w/ PU coating (high wear areas)
                200 denier polyester (lining)

Zippers: YKK zippers with DWR coating

Warranty: 3 years from date of purchase

*Cylinders are sold separately. For quick link to purchase, click here.

The Float 15 Turbo avalanche airbag is designed for backcountry mechanized skiing,snowmobiling and snowboarding, creating buoyancy and helping you float to the surface, the 150-liter avalanche airbag not only decreases your burial depth but also protects your head and neck from trauma in an avalanche. If you are a backcountry snowmobiler this avalanche airbag pack is definitely for you.

Bca has 200 refill locations around the world make it the easiest refillable avalanche airbag system on the market.

A BCA float 2.0 cylinder must be purchased separately.

Specs:

Volume: 915 cu. in 

Weight: 6.1 lbs (full system with full cylinder)
             4.9 lbs (full system with empty cylinder)
             3.4 lbs (pack only)

Dimensions: Waist: 63 inches Crotch: 43 inches Shoulder: 47 inches

Warranty: 3 year from date of purchase

The Backcountry Access Float 22 avalanche airbag is designed for out of bounds, freeride, and mechanized skiing, snowboarding and snowmobiling Creating buoyancy and helping you float to the surface, the 150-liter airbag not only decreases your burial depth but it  also protects your head and neck from trauma in the event of an avalanche. This do it all pack will easily carry your winter rescue tools, lunch, water, and extra layer for a full day in the backcountry.

Bca has 200 refill locations around the world make it the easiest refillable avalanche airbag system on the market.

A BCA float 2.0 cylinder must be purchased separately.

Specs:

Volume: 1343 cubic inches

Weight: 6.3 lbs  (full system with cylinder)
             5.0 lbs (full system without cylinder)
             3.6 lbs  (pack only)

Dimensions: Waist: 63 in Crotch: 43 in Shoulder: 47 in

Materials: 210 denier mini ripstop nylon with PU/coating (main)
                420 denier mini ripstop nylon with PU/coating (high wear areas)
                200 denier polyester (lining)

Zippers: YKK zippers with DWR coating

Warranty: 3 years from date of purchase

If you are a backcountry snowmobiler, this avalanche airbag pack is for you.  The Float 25 Turbo avy airbag is designed for backcountry mechanized skiing, snowboarding and snowmobiling. Another great feature of this is bag is the airbag itself, Creating buoyancy and helping you float to the surface, the 150-liter airbag not only decreases your burial depth but also protects your head and neck from trauma in an avalanche. All BCA Float packs include integration for Bc Link Radios, hydration sleeve, dual zippered shoulder straps, and molded back panel. Bca's most technical avalanche airbag pack for big days mountain sledding, with versatility and volume for big days. 

Bca has 200 refill locations around the world make it the easiest refillable avalanche airbag system on the market.

Float cylinder 2.0  AND Shovel SOLD SEPARATELY