Protect Your Goggles

Extend the life of your mirrored goggle lenses with the all new 509 Universal Goggle Hard Case. This rigid, durable hard case will literally pay for itself in very short order. There is nothing more damaging to a set of mirrored lenses than throwing them into your gear bag unprotected. Fact is most lens scratches happen will your goggles are not even being used: In your gear bag, back seat of your truck, in the trunk of your sled, etc. Our new hard case solves these problems and greatly increases the life span of your lenses.

Our all new hard case has several new features...

• Integrated lens pockets: Store up to 3 spare lenses in their own separated lens pockets. Keep your lenses separate and scratch free.
• Metal Carabiner Clip: Use the integrated metal carabiner to clip your hard case onto your pack or virtually any other object.
• Glove Friendly Zipper Pull: Each case features a large rubber coated zipper pull that is glove friendly!

Last season the innovative 509 Altitude helmet took the snowmobile industry by storm. Described as a sleek yet aggressive helmet, it is packed with industry-leading features. Despite the rave reviews and success of this helmet, we went back to the drawing board and asked, “How can we improve?” The result….CARBON FIBER! You heard correctly. All-new for 2016 is the full Carbon Fiber Altitude helmet the same fit and function you've come to expect, now crafted from one of the strongest materials on the planet. Strength aside, the Carbon Fiber Altitude is noticeably lighter than its thermoplastic counterpart. If you are looking for the very best snowmobile helmet, look no further than the all-new 2016 509 Carbon Fiber Altitude helmet!

SAFETY

The Altitude helmet meets or exceeds DOT & ECE 2205 safety certification standards. It features an innovative dual density, interlocking EPS foam liner that provides top crash protection in the event of an accident. The front chin area of the helmet is protected by a specially designed expanded polyurethane chin insert that provides front impact protection. The outer shell is made of specially designed carbon fiber for maximum shell strength with minimal weight.

PERFORMANCE

In addition to its safety accolades, performance was a key focus during the development process. Innovative aerodynamic channels run across the entire contour of the helmet. These channels are integrated directly into shell and direct adequate air flow into the specially designed vent scoops. The Altitude helmet features 6 integrated vent scoops that provide necessary ventilation to keep you comfortable when riding. Overall, the Altitude features 8 intake/exhaust vent ports. And for those cold days, snap in the included cold weather breath box. The unique aerodynamic visor features a locking-top center mount that holds the visor in place and prevents unwanted visor movement.

FIT

The Altitude was designed with two key fit metrics in mind: Rider fit & Goggle fit. First, we created a custom interior EPS matched with a premium removable liner. The Carbon Fiber Altitude is available in 8 sizes from XS to 4XL (Thermoplastic Altitude available in 11 sizes from Youth small to Adult 4XL). These 8 sizes are carefully designed across 3 outer shell molds - our competitors only use 2. This provides a precision fit, while minimizing overall helmet circumference. The neck brace ready, contoured shell base provides a comfortable, yet snug feel when putting the helmet on. When the helmet is fully in place it provides an unmatched comfort fit that prevents unwanted helmet movement. The eyeport of the Altitude helmet was carefully crafted to fit our 509 Sinister X5 & Aviator goggles perfectly, further improving our world famous “509 helmet & goggle combo” fit. The Altitude helmet & 509 brand goggles are two product designed to fit and perform at the highest level when used in combination. And because fit is only as good as the overall weight, the Carbon Fiber Altitude weighs in under 1100g while the Thermoplastic Altitude starts at a class leading 1260g.

STYLE

Finally, the always important STYLE FACTOR. We wanted this helmet to not only perform at the highest level, but to look good doing it. The shell features sleek, yet aggressive lines that provide an innovative and unmatched look. Everything - from the integrated front mouth vent, to the innovative ventilation channels, to the sweeping upward-kicked visor - provides a flowing and seamless transition. Last, but definitely not least, we know you want to show off your riding talent while wearing the Altitude helmet. That's why each Altitude comes standard with an innovative GoPro camera mount that mounts securely in seconds to the top visor mount.

Altitude Carbon Fiber Helmet Size Chart

As the most versatile sock in the Klim lineup, the Klim sock performs perfectly in  wide range of circumstances. In warmer conditions the KLIM sock wicks moisture and dries quickly. Wool content insulates and keeps you comfortable in colder conditions. The perfect hybrid sock for every ride.

• UPDATED WITH MORE LYCRA TO IMPROVE ELASTICITY AND FIT AT ANKLE 
• FULL TERRY KNIT AT BOTTOM OF FOOT FOR ULTRA COMFORT, WARMTH, AND PADDING 
• FULL TERRY KNIT AT ENTIRE FRONT SHAFT FOR SHIN COMFORT, WARMTH, AND PADDING 
• WICKS MOISTURE
• ABOVE CALF DESIGN
• NYLON REINFORCED TOE, HEEL, SOLE FOR DURABILITY
• ANKLE SUPPORT STRETCH BAND TO HELP KEEP SOCK IN POSITION, NO SLIPPING OR BUNCHING
• ARCH SUPPORT STRETCH BAND TO HELP KEEP SOCK IN POSITION, NO SLIPPING OR BUNCHING
• PATTERNED BEND AND REGULAR KNIT AT FRONT MID ANKLE TO HELP PREVENT BUNCHING 
• 39% COOLMAX, 31% MERINO WOOL, 28% POLYAMIDE, 2% LYCRA

*Note that the use of a technical sock is required to obtain the full functionality of GORE-TEX boots.

Sizing:

• SM: Shoe size 4/5/6
• MD: Shoe size 7/8/9
• LG: Shoe size 10/11/12

 Weight Loss on Models

• all Axys Trail mufflers 10 lbs, all Axys Race mufflers 13 lbs
• all Pro Chassis Trail mufflers 9 lbs
• all IQ Chassis Trail mufflers 9 lbs, std mufflers 10 lbs
• all Edge and Gen II Chassis Race mufflers exc. xcr 10 lbs
• all Gen II Triple Race Muffler 9 lbs

Trail:

• 6" can (body)
• The lowest in weight loss and performance but provides increase of machine performance with minimal noise volume, but definitely improves the exhaust tone.

Standard:

• 5" can (body)
• Medium weight loss and performance while providing increase of performance over the Trail with a noticeable increase in noise volume over stock silencer
• Additional weight is saved by less packing inside the can, increasing noise output
• Heat dissipates faster allowing the machine to run cooler

Race:

• 4" can (body)
• Highest increase in horsepower and greatest weight loss of the three while giving definite performance increase over the Standard and Trail
• Less packing inside silencer allows for additional weight loss but noticeable noise increase and allows the heat to dissipate even faster

MBRP builds three styles of mufflers. MBRP builds only the Trail style for some sleds, while offering Trail and Standard or Trail and Race for other sled models. If you do not see your sled listed below please check the other styles of exhaust mbrp offers, if you are still having issues just shoot us an email support@blownmotor.com

Designed for high-performance mountain snowmobiling, the Float MtnPro Vest avalanche airbag is a low profile pack/vest that integrates with external equipment such as hydration systems or our BC Link Radios.

The Float MtnPro Vest features full front, side and back protection with 1mm of hard shell sandwiched between two layers of PE foam. This provides protection from trees, rocks, handle bars, or whatever else you might come across on your sled adventures. The Float MtnPro Vest includes external shovel carry, secure dual side-release buckles over the front zip, articulated shoulders, and bigger pockets.

BCA’s next-generation Float 2.0 cylinder is nearly 30% smaller and 15% lighter than our Float 1.0 engine.  All the Float 2.0 system elements sit entirely separate behind a zippered covering, freeing up valuable space in the main compartment for gear, first-aid kit, and supplies.

BCA has over 200 refill locations around the world make it the easiest refillable airbag system on the market. 

Float 2.0 air cylinder must be purchased separately.

The Float Airbag system does not guarantee survival in an avalanche incident.  Educate yourself, make good decisions, and know before you go!

• Volume : 1220 cu. in / 20 liters (with system)
• Weight : 8.1 lb / 3,652 g (M/L full system with full cylinder), 8.3 lb / 3,770 g (XL/XXL full system with full cylinder), 6.9 lb / 3,094 g (M/L full system without    cylinder), 7.1 lb / 3,212 g (XL/XXL full system without cylinder), 5.4 lb / 2,432 g (M/L vest/pack only), 5.6 lb / 2,550 g (XL/XXL vest/pack only
• Dimensions : Torso size: 17.5” – 20.5” / 44.4 – 52.1 cm (M/L), Chest size: Size 38” – 46” / 96.5 – 116.8 cm (M/L), Torso size: 18.5” – 21.5” / 47 – 53.3 cm (XL/XXL), Chest size: 46” – 54” / 116.8 – 137.2 cm (XL/XXL)
• Warranty : 3 Year 

As the most fully insulated glove in the KLIM lineup and redesigned with outseam construction from maximum comfort, only the Fusion incorporates GORE-TEX Gloves + Gore 2 in 1 technology. With 200 grams 3M Thinsulate Insulation on the top of hand and 60 grams in an internal divider worn on top or below the hand, the Fusion adapts to every condition.

• GUARANTEED TO KEEP YOU DRY
• GORE-TEX GLOVES + GORE 2 IN 1 TECHNOLOGY OFFERING TWO DIFFERENT CHAMBER OPTIONS BETWEEN DIRECT GRIP AND WARMTH
• COMBINED 260 GRAMS HYDROPHOBIC SILICONIZED 3M THINSULATE PLATINUM INSULATION
• OUTSEAM CONSTRUCTION FOR MAXIMUM COMFORT
• LEATHER PALM AND OVERLAYS ON KNUCKLES AND TWO FINGERS
• ENTRY ASSIST PULL-ON LOOP AND PULL-TO-EJECT TAB

 

For riders who push what’s possible in the mountains, the 509 Stoke Mono Suit Shell offers ultimate weatherproof performance. An evolution of the ever so popular 509 Stoke jacket and bib pant 509 stepped it up with this one-piece  suit that packs a punch with stretch 5TECH Pro 3-layer fabric, 20k/20k waterproof/breathability, and FUSION welded seams. Add it all up and you get head-to-toe protection that feels remarkably lightweight, mirrors your every move, and is extremely resilient to the harsh realities of backcountry riding.

FEATURES

• 5TECH™ Pro 3 layer stretch material - 20K/20K waterproof breathable. Windproof. Durable face fabric with stretch absorbs impact and recovers, reducing tearing and ripping.
• Fusion Welded Seams are flatter, dryer, and less bulk than normal sewn and seam-taped seams
• Smooth running main zipper is waterproof YKK® coil zipper, with additional zippered gusset at the collar for extra room in the collar
• Reinforced durability zones using 600 D Polyester reinforcement
• 5Ride protection zone in seat for improved comfort, and less condensation
• Built in knee pads protects knee, and helps to protect garment from impact punctures, removable
• Cuff with innovative Speed Cinch closures, and wrist gaiters for final seal
• 3/4 leg zips and boot gaiters for easy on and off, before or after you put your boots on
• Pit zips, and thigh venting for adaptable venting
• Internal Stoke Harness for control and comfort
• Internal pocketing for phone and essentials
• Permanent alpine hood

SPECS

• Material: 5TECH™ Pro 20K waterproofing 20k breathabillity 
• Style: Shell
• Insulation: Non-insulated
• Riding: Backcountry

 Bca's most streamlined, high performance avalanche beacon in a value package price. Included in the package is a harness & batteries. Simplicity is speed!

The BCA Tracker S avalanche transceiver is very affordable easy to use digital transceiver that has the performance, ease of use and instantaneous real-time display of the tracker 3 beacon without motion-sensing or upgradeable software advanced features needed by snow professionals saving you money and still getting a fantastic beacon without any added costs.

FREQUENCY

457 kHz

55 meters

50 meters

three AAA alkaline

minimum 1 hour in search mode after 200 hours in transmit mode. (approximately 250 hours in transmit only or 50 hours in search only)

5.8 oz / 165 g including batteries (not harness.

4.2 oz / 120 grams

4.5 x 2.8 x 1.0 inches / 11.5 x 7.1 x 2.6 cm

Limited 5-year warranty.

Assembled and tested in the USA.

U.S. patent numbers: 6,167,249 & 6,484,021, B. Certified to be in compliance with all applicable North American and European norms.

KLIM's popular ALLURE collection receives great updates for the latest generation of snow-minded women. The ALLURE JACKET features 200 Grams of 3M THINSULATE insulation inside top-performing GORE-TEX fabrics. Added a snow-skirt to prevent snow and cold drafts from entering jacket. Updated color options include custom embossed patterning and accented logos and zipper treatments. 

• GUARANTEED TO KEEP YOU DRY
• GORE-TEX PERFORMANCE SHELL
• WOMEN-SPECIFIC PATTERNING
• ELBOW ARTICULATION
• COMFORT-MAPPED THINSULATE INSULATION
• MORE VISIBILITY THROUGH 3M SCOTCHLITE REFLECTIVE MATERIAL
• POLYESTER TAFFETA QUILTED LINER
• LOW PROFILE CENTER¬† FRONT ZIPPER FLAP¬†
• 1 INSIDE ZIPPERED POCKET
• SIDE ZIPPER HEM ADJUSTMENT
• 300 GRAM FLEECE LINED COLLAR
• 2 EXTERIOR BRUSHED TRICOT-LINED HAND POCKETS WITH KEY RETAINER CLIP
• HAND GAITERS
• PAINT PIXEL HEAT-EMBOSSED TEXTURE FABRIC
• YKK ZIPPERS‚Ä¢ VELCRO BRAND VELCRO ON ADJUSTABLE CUFFSHYPALON MP3 PORT
• WOMEN-SPECIFIC ZIPPER PULL TABS
• WOMEN-SPECIFIC SNAPS
• LEFT FOREARM POCKET
• KILL SWITCH D-RING

 $6745.99 RETAIL VALUE, YOU PAY $4450.00

Fits the Polaris AXYS RMK 800 (2016-2020)

Pump Gas

Factory Tuned

Complete Package

Lightweight Design

Responsive Driveability

Predictable Horsepower

Consistent Performance

Alititude-Compensating Boost

Pull n' Go Turbocharger

Factory-tuned, pull 'n go turbo kit.  Pro-tuned for optimum boost on pump gas.

To maximize performance, add a Lightweight Water to Air Intercooler for an additional +$749

Deep Snow Exhaust: Features BoonDocker's patented tunnel exit design to prevent bogging in deep snow conditions.

Garrett GT2860 Premium Turbo Charger (crafted with high quality machining and components)

Cast Iron Exhaust Housing and Wastegate (comes standard with the low boost actuator)

Airbox (designed for maximum air flow and connects into the stock air intake)

Deep Snow Exhaust Muffler (tunnel exit, lightweight, great sound)

Sidekick Control Box (pro-tuned from the factory with altitude-compensating boost control)

Clutching (to ensure the best performance)

All of the components, fittings, and hardware necessary for installation

Reduce charge-air temps and increase performance with our high-efficiency water-to-air intercooler packages for Polaris AXYS 800. Hotter charge air contains less oxygen and will make less power. Additionally, high charge-air temperatures can cause lazy performance. Get the most out of your machine with an intercooler! 

INTERCOOLER UPGRADE

For the highest-performance enthusiast, the water-to-air Intercooler Expansion Package for the Polaris AXYS 800 (SideKick or Agility) cools charge air temperatures up to 30% over non-intercooled. It delivers consistent, reliable power, regardless of conditions, so you can have more fun, every weekend.

Compressing air makes heat. This heat is manifested in your charge air temperatures. Hotter charge air holds fewer molecules of oxygen. Less oxygen means less fuel for a proper stoichiometric combustion. Less fuel and less oxygen mean less power. Don't cheat yourself out of potential power; get an intercooler today.

Agilty style intercooler fits SideKick OR Agility!

SideKick-style intercooler fits SideKick ONLY

An intercooler should be considered if your riding includes: extended periods of Wide Open Throttle (WOT), running above 10 PSI boost, or if you want the most consistent runability, regardless of conditions!